6X10X3 EZO STAINLESS STEEL SHIELDED BALL BEARING

A Stainless Steel top quality EZO branded ball bearing manufactured in Japan

Measurements; 6X10X3 Inner Diameter x width x depth

These bearings are supplied in stainless steel (AISI440C or KS440).
Sapporo Precision of Japan manufacture EZO brand miniature bearings and are leading specialists in their field with a deserved reputation for quality and reliability across the world. The EZO brand guarantees you a high precision product every time thanks to advanced production techniques and the highest levels of quality control.

This listing is copyright ©www.jimsreelshop2023
 
Please make sure your delivery address, is the same as registered to the card used for payment!

Due diligence checks are in process at Jim's Reel Shop!!!
 
Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

STAINLESS STEEL DRIVE/MAIN GEAR SHIMS I/D 9MM O/D 15MM THICKNESS 0.10MM

Shims are used for obtaining the optimum ball bearing end float/clearance when setting up Drive & Pinion gears during routine maintenance of fishing reels. At Jim's Reel Shop we use Stainless Steel or Brass shims. These are Stainless Steel;

Dimensions;

I/D; inner diameter 9mm
O/D; outer diameter 15mm
T; Thickness 0.1mm
We have shims in 0.10, 0.20 & 0.30mm thicknesses all listed separately

Please see the images
If unsure these parts are suitable for your reel, please ASK!

This listing is copyright ©www.jimsreelshop2023
 
Please make sure your delivery address, is the same as registered to the card used for payment! Due diligence checks are in process at Jim's Reel Shop!!!
 
Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

30x8X1 CARBONTEX CARBON-FIBRE REEL DRAG WASHER

A single Carbontex drag washer. Dimensions; 30x8x1
O.D Outer Diameter 30mm
I.D Inner diameter 8mm
T, Thickness 1mm

Carbontex drag washers, are high-quality carbon-fibre drag washers. They are manufactured in the USA. The perfect combination of unrivalled stopping power, silky smoothness with an outstanding consistency, with a very-high heat tolerance.
Carbontex drag washers may be used dry or with a very light coating of your favourite drag grease.

This listing is copyright ©www.jimsreelshop2022

Please make sure your delivery address, is the same as registered to the card used for payment! Due diligence checks are in process at Jim's Reel Shop!!!

Jim's Reel Shop Service & Supply parts for ABU-Garcia, Akios, Daiwa, Penn & Mitchell fishing reels

AKIOS NITRON F-15 SPOOL BALL BEARINGS S/STEEL ABEC 7

A pair of German manufactured Stainless Steel ball bearings. ABEC 7 rating

For the Akios Nitron F-15 model

This listing is copyright©www.jimsreelshop2021

Please check your reel schematic to confirm that you are ordering the part you require, using the correct part number.

Jim's Reel Shop Service & Supply NEW parts for  ABU-Garcia, Daiwa, Penn, Shimano & Mitchell fishing reels

AKIOS HANDLE SECURING KIT LEFT HANDED 551/661 REELS
 
A new Akios left handed 551 & 651 series handle securing kit
 
Suitable for the following Left Handed Akios models: 
 
551LSI
551SCM
651CS
651
CSM
651CTM
651LSI
651SCM
 
This listing is copyrighted ©www.jimsreelshop2018

Comprising of Handle Nut #66119-LH
Nut keeper plate #HD-6505
Nut keeper plate screw #9807
 
Please check your reel schematic to confirm that you are ordering the part you require, using the correct part number.
 
Jim's Reel Shop Service & supply parts for ABU-Garcia, Akios, Daiwa, Penn, Shimano & Mitchell reels

AKIOS 6000/7000 SERIES SPOOL CAST CONTROL CAP HANDLE SIDE   
 
A New Akios 6000/7000 series handle side cast control cap.

This is a bare cap, no internal parts are included.
 

Important: please check your reel schematic/exploded reel diagram for the part number. If it is not the same part number it will NOT fit! If unsure, please ASK!

 
This listing is copyright ©www.jimsreelshop2019
 
Jim's Reel Shop Service & Supply parts for ABU-Garcia, Akios, Daiwa, Penn, Shimano & Mitchell reels, if the parts are available!

AKIOS 656 BRAKE BLOCKS
 
A pair of new Akios 656 Centrifugal Brake Weights. They are attached to the two-pin centrifugal brake support, which is found one end of the spool

We also stock the Akios Six-Brake-Block assemblies

Akios part number 66406

Please check your reel schematic to confirm that you are ordering the part you require, using the correct part number.
 
Jim's Reel Shop Service ABU-Garcia, Akios, Daiwa, Penn & Mitchell reels. We are official Pure Fishing parts dealers & Daiwa parts stockists. Official Corrosion X product stockists & Smooth Drag product retailers

AKIOS 600 SERIES MULTIPLIER SUPPORT PLATE # 66125
 
A new Akios 600 series support plate. For the 656CS, 656CSM & 656CTM 
 
Not suitable for the L/Handed models

Please see the images!
Please check your reel schematic to confirm that you are ordering the correct part. To find the part number consult the exploded diagram, which comes with the reel when new. If UNSURE please ASK, BEFORE ordering. Thank you!   

Please make sure your address, is the same as registered to the card, used for payment! If it isn't, your order will be cancelled!

Due diligence checks are in process at Jim's Reel Shop!!!
This listing is copyright ©www.jimsreelshop2024

Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

AKIOS 600 SERIES MULTIPLIER CLUTCH PLATE #66123

A new Akios 600 series clutch plate. For the 656CS, 656CSM & 656CTM 

Not suitable for the L/Handed models

NEW AKIOS 656 CARBON DRAG WASHER & CAL'S GREASE UPGRADE KITS

Brand New replacement Full Carbon Drag Washer Conversion kits for the AKIOS 656 reels

Smoooooth Drag from the USA, manufacture Carbontex Carbon fibre drag washers. These premium quality drag washers are the new generation, of carbon drag washers. The high quality carbon fibre material is the perfect combination of unrivalled stopping power, silky smoothness and outstanding consistency, with a high heat tolerance. Carbontex drag washers are the the best upgrade in drag washers, available, try them and you will not be disappointed.

The fitment of Carbontex drag washers enable a greater drag pressure to be applied to the line and can be used dry, or with a very light coating of Cal's drag washer grease, which is highly recommended. This set comprising of four Carbontex drag washers is designed to replace the stock Akios drag washers. Each set comprises of four Carbontex drag washers and is enough to convert a single reel. Cal's grease is highly recommended .

This kit is for the:

AKIOS S-Line 656CS  (CS cage with synchronised level-wind & Centrifugal brakes)
AKIOS S-Line 656CSM (CS cage with synchronised level-wind & Magnetic & centrifugal brakes)
AKIOS S-Line 656CTM (CT open cage & Magnetic & centrifugal brakes)

We have Carbontex drag washer sets and loose washers available for most reels. If you don't see it listed please ask!  

This listing is copyright ©www.jimsreelshop2018
 
Jim's Reel Shop Service & Supply parts for ABU-Garcia, Akios, Daiwa, Penn, Shimano & Mitchell reels, if the parts are available!