SHIMANO ULTEGRA 5500XTD REPLACEMENT E-CLIP # RD17989

A new replacement Shimano Ultegra E-Clip. This is the clip located on the axle and under the Line Safety Guard

Shimano part number RD17989

Please see the images!
Please check your reel schematic to confirm that you are ordering the correct part. To find the part number consult the exploded diagram, which comes with the reel when new. If UNSURE please ASK, BEFORE ordering. Thank you!   

Please make sure your address, is the same as registered to the card, used for payment! If it isn't, your order will be cancelled!

Due diligence checks are in process at Jim's Reel Shop!!!
This listing is copyright ©www.jimsreelshop2024

Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

SHIMANO BAITRUNNER 3500 CARBONTEX DRAG WASHER UPGRADE

Carbontex drag washers are the new generation of premium quality Carbon drag washers. Carbontex is a perfect combination of unrivalled stopping power, with a silky smoothness. The most worthwhile upgrade in my opinion and best upgrade available, with a high heat tolerance with an outstanding consistency! Try them and you will not be disappointed. The Carbontex material enables a greater drag pressure to be applied to the line and can be used dry, or with a very light coating of Cal's drag washer grease

This set of Carbontex drag washers comprises of THREE drag washers which are direct replacements for the stock plastic drag washers fitted to the Shimano Baitrunner 3500 reels

PLEASE NOTE: THE SPOOL IS NOT INCLUDED

Carbontex drag washers should not be confused with the inferior glass fibre laminated drag washer material flooding the market on a well-known auction website. The material is manufactured in Asia and is cheap, nasty and wears extremely badly!

Please see the images  
If unsure these parts are suitable for your reel, please ASK!

Please make sure your address, is the same as registered to the card, used for payment! If it isn't, your order will be cancelled!

Due diligence checks are in process at Jim's Reel Shop!!!

This listing is copyright ©www.jimsreelshop2023

Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

5X8X2.5 STAINLESS STEEL SHIELDED BALL BEARING

A Stainless Steel top quality ball bearing manufactured in Japan

Measurements; 5X8X2.5 Inner Diameter x width x depth

These bearings are supplied in stainless steel (AISI440C or KS440).

This listing is copyright ©www.jimsreelshop2023
 
Please make sure your delivery address, is the same as registered to the card used for payment, or your order will not be accepted!

Due diligence checks are in process at Jim's Reel Shop!!!
 
Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

5X9X3 EZO STAINLESS STEEL SHIELDED BALL BEARING

A Stainless Steel top quality EZO branded ball bearings manufactured in Japan

Measurements; 5X9X3 Inner Diameter x width x depth

These bearings are supplied in stainless steel (AISI440C or KS440).
Sapporo Precision of Japan manufacture EZO brand miniature bearings and are leading specialists in their field with a deserved reputation for quality and reliability across the world. The EZO brand guarantees you a high precision product every time thanks to advanced production techniques and the highest levels of quality control.

This listing is copyright ©www.jimsreelshop2023
 
Please make sure your delivery address, is the same as registered to the card used for payment!

Due diligence checks are in process at Jim's Reel Shop!!!
 
Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

33x8x0.5 CARBONTEX CARBON-FIBRE REEL DRAG WASHER

A single Carbontex drag washer. Dimensions; 33x8x0.5
O.D Outer Diameter 33mm
I.D Inner diameter 8mm
T, Thickness 0.5mm

Carbontex drag washers, are high-quality carbon-fibre drag washers. They are manufactured in the USA. The perfect combination of unrivalled stopping power, silky smoothness with an outstanding consistency, with a very-high heat tolerance.
Carbontex drag washers may be used dry or with a very light coating of your favourite drag grease.

This listing is copyright ©www.jimsreelshop2022

Please make sure your delivery address, is the same as registered to the card used for payment! Due diligence checks are in process at Jim's Reel Shop!!!

Jim's Reel Shop Service & Supply parts for ABU-Garcia, Akios, Daiwa, Penn & Mitchell fishing reels

8x14x4 EZO STAINLESS STEEL SHIELDED BALL BEARINGS PAIR

A pair of Stainless Steel top quality EZO branded ball bearings manufactured in Japan

Measurements; 8x14x4 Inner Diameter x width x depth

These bearings are supplied in stainless steel (AISI440C or KS440).
Sapporo Precision of Japan manufacture EZO brand miniature bearings and are leading specialists in their field with a deserved reputation for quality and reliability across the world. The EZO brand guarantees you a high precision product every time thanks to advanced production techniques and the highest levels of quality control.

This listing is copyright ©www.jimsreelshop2022
 
Please make sure your delivery address, is the same as registered to the card used for payment!

Due diligence checks are in process at Jim's Reel Shop!!!
 
Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

3x10x4 EZO STAINLESS STEEL SHIELDED BALL BEARINGS PAIR

A pair of Stainless Steel top quality EZO branded ball bearings manufactured in Japan

Measurements; 3x10x4 Inner Diameter x width x depth

These bearings are supplied in stainless steel (AISI440C or KS440).
Sapporo Precision of Japan manufacture EZO brand miniature bearings and are leading specialists in their field with a deserved reputation for quality and reliability across the world. The EZO brand guarantees you a high precision product every time thanks to advanced production techniques and the highest levels of quality control.

This listing is copyright ©www.jimsreelshop2022
 
Please make sure your delivery address, is the same as registered to the card used for payment!

Due diligence checks are in process at Jim's Reel Shop!!!
 
Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

SHIMANO RD7209 CARBONTEX DRAG WASHER GTE10000C UPGRADE RD7209-CTEX SET

A set of Carbontex drag washers, to replace the stock soft black drag washers, found in many Shimano reels. These washers are replacements for Shimano RD7209. The are located in the rear of the reel and are part of the Baitrunner mechanism.

Please see the images of the washers & the lay out of the drag washers

 Carbontex Carbon fibre drag washers are the perfect combination of unrivalled stopping power, silky smoothness, outstanding consistency with a high heat tolerance. They are the best upgrade in drag washers, available, in our opinion, try them and you will not be disappointed! Carbontex enable a greater drag pressure to be applied and can be used dry, or with a very light coating of drag washer grease
This set of Carbontex drag washers is for many Shimano models, including the GTE 10000C. There are two Carbon drag washers in this kit, which replace the standard soft drag washers and improve the drag, enough for a reel

Please note: spools/reels are NOT included! To fit the washers the reel needs to be partially disassembled, & the bait runner assembly stripped down! We have Carbontex drag washer sets and loose washers available for most reels. If you don't see it listed please ask!  For enquiries & credit/debit card payments please telephone; 07523142760

Please make sure your delivery address, is the same as registered to the card used for payment! If it does not your order will be declined. Due diligence checks are in process at Jim’s Reel Shop!!!

Jim’s Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

SHIMANO CALCUTTA CONQUEST 800F CARBONTEX DRAG WASHERS

A set of premium quality Carbontex drag washers. The high-quality carbon fibre material is the perfect combination of unrivalled stopping power, silky smoothness, and outstanding consistency. Carbontex washers are the best upgrade in drag washers, available, try them and you will not be disappointed!

This set of Four Carbontex drag washers are for the Shimano Calcutta Conquest 800F model only! They replace the standard soft drag washers

Please see the images!

This listing is copyright©www.jimsreelshop2022
We have Carbontex drag washer sets and loose washers available for most reels. If you don't see it listed, please ask!

For enquiries & credit/debit card payments please telephone 07523142760

Jim's Reel Shop Service & Supply parts for ABU-Garcia, Daiwa, Mitchell & Penn fishing reels

SHIMANO CALCUTTA 7000 CARBON DRAG WASHER KIT

Smoooooth Drag from the USA, manufacture Carbontex Carbon fibre drag washers. Carbontex premium quality drag washers are the new generation, of carbon drag washers. The high-quality carbon fibre material is the perfect combination of unrivalled stopping power, silky smoothness and outstanding consistency, with a high heat tolerance. Carbontex drag washers are the best upgrade in drag washers, available, try them and you will not be disappointed.
Carbontex enable a greater drag pressure to be applied and can be used dry, or with a very light coating of Cal's drag washer grease.
This listing is for a Carbon drag washer kit, of four washers to replace the standard drag washers in the Shimano Calcutta 700, CT700, 700B, 700BSV and 700S models

This listing is copyright©www.jimsreelshop2022

Jim's Reel Shop SERVICE & supply parts for ABU, Akios, Daiwa, Penn & Mitchell fishing reels