ABU PREMIER 706 CLOSED FACE HANDLE ASSY # ABU-706-HDL-ASSY

An ABU 706 Closed face handle assembly

JRS part number ABU-706-HDL-ASSY

This listing is copyright©www.jimsreelshop2022
Please check your reel schematic to confirm that you are ordering the correct part. To find the part number consult the exploded diagram, which comes with the reel when new. If UNSURE please ASK, BEFORE ordering!

Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

ABU GARCIA 1044/704/706 DRAG ADJUSTER COVER CAP

A new old stock ABU closed face 1044/704/706 DragAdjuster Cover Cap

ABU part number 18943

If you are UNSURE this part is suitable for your reel please ASK, BEFORE ordering. Thank you!  

This listing is copyright©www.jimsreelshop2021

Jim's Reel Shop Service & supply NEW parts for ABU, Akios, Daiwa, Penn & Mitchell fishing reels

ABU CARDINAL 3/4/4X/33/40/44 & 44X SPOOL CHENILLE 
 
Two pieces of chenille to refurbish the plastic spools as fitted to the ABU Cardinal 3/4/4X/33/40 & 44X spinning reels. These are the pieces of spool chenilles, often described as "pipe cleaners" There is enough chenille to refurbish two of the plastic match spools as fitted to the Cardinal spinning reels
 
Chenille is attached around the lower circumference of the ABU Cardinal spools, as it helps to prevent the wind blowing the line behind the spool and becoming entangled. Which causes much annoyance when fishing!
 
Two pieces of  chenille are included. They are white in colour with a soft wire insert. The original ABU chenille was red in colour, and has not been available from ABU for over thirty  years and in the intervening years most of the original chenille is missing from most of the reels we have in for servicing. A replacement for the chenille fitted to the deep spool ABU part number 9881 and the Match capacity spool part number 7044
 
Please note: the spool is NOT included! The images illustrate the chenille attached to the spool

Jim's Reel Shop Service & Supply parts for ABU-Garcia, Akios, Daiwa, Penn, Shimano & Mitchell reels, if the parts are available!

ABU GARCIA 507MK2 HANDLE CAP O-RING  #1386389  
 
A New Abu-Garcia 507MK2 Handle Cap O-Ring
 
Abu part number 1386389  

This part is located over the Handle screw
 
Please note NOT suitable for the 1990's Gold Max 507 MK2
 
Important: please check your reel schematic/exploded reel diagram for the part number. If it is not the same part number it will NOT fit! If unsure, please ASK!

This listing is copyright ©www.jimsreelshop2018

Jim's Reel Shop Service & Supply parts for ABU-Garcia, Akios, Daiwa, Penn & Mitchell reels, if the parts are available!

ABU 507 CLOSED-FACE SPOOL LOCKED BOARD #1386378

A new Abu 507 Spool Board. This is the plate that the spool pins lock into and secures the spool to the reel

Abu part number 1386378

Important: please check your reel schematic/exploded reel diagram for the part number. If it is not the same part number it will NOT fit!
If unsure, please ASK!

This listing is copyright ©www.jimsreelshop2018

Jim's Reel Shop Service & Supply parts for ABU-Garcia, Akios, Daiwa, Penn & Mitchell reels, if the parts are available!

ABU 506MK2 CONE ASSEMBLY # 1193159

A Serviceable ABU 506 MK2 Cone Assembly 

Abu part number 1193159

Please see the images!

Important: please check your reel schematic/exploded reel diagram for the part number. If it is not the same part number it will NOT fit!
If unsure, please ASK!

This listing is copyright ©www.jimsreelshop2023

Jim's Reel Shop Service & Supply parts for ABU-Garcia, Daiwa, Penn & Mitchell fishing reels

ABU GARCIA 507MK2 HANDLE ASSEMBLY #1386403  
 
An ABU-Garcia 507MK2 Handle Assembly, a reclaimed clean & serviceable part
 
Abu part number 1386403

 Please check your reel schematic to confirm that you are ordering the part you require, using the correct part number.

Please note NOT suitable for the 1990's Gold Max 507 MK2 or Swedish 507

Please check your reel schematic to confirm that you are ordering the correct part. To find the part number consult the exploded diagram, which comes with the reel when new. If UNSURE please ASK, BEFORE ordering. Thank you! If unsure these parts are suitable for your reel, please ASK!

Please make sure your address, is the same as registered to the card, used for payment! If it isn't, your order will be cancelled!

Due diligence checks are in process at Jim's Reel Shop!!!
This listing is copyright ©www.jimsreelshop2024

Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

ABU GARCIA 507MK2 HANDLE SHAFT # 1386401  
 
A RECLAIMED Abu-Garcia 507MK2 Handle Shaft 
 
Abu part number 1386401

Please see the images!
Please check your reel schematic to confirm that you are ordering the correct part. To find the part number consult the exploded diagram, which comes with the reel when new. If UNSURE please ASK, BEFORE ordering. Thank you! If unsure these parts are suitable for your reel, please ASK!

 Please note NOT suitable for the 1990's Gold Max 507 MK2

Please make sure your address, is the same as registered to the card, used for payment! If it isn't, your order will be cancelled!

Due diligence checks are in process at Jim's Reel Shop!!!
This listing is copyright ©www.jimsreelshop2023

Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

ABU 1044/PREMIER 704/ABUMATIC170/1075 E-CLIP RETAINER # 17304 (PAIR)
 
This listing is for a PAIR of ABU E-clips. These E-clips are used to retain the spool holder.

ABU part number 17304

This part is compatible with the following ABU reels:  

1044 (91 00)
Premier 704
ABUMATIC 1075 (85 01) 
ABUMATIC 170 (03)

Please check your reel schematic to confirm that you are ordering the correct part. To find the part number consult the exploded diagram, which comes with the reel when new. If UNSURE please ASK, BEFORE ordering!
If you order using the incorrect part number, or cannot be bothered to read the description, the part will NOT FIT your reel

This listing is copyright©www.jimsreelshop2023

Jim's Reel Shop SERVICE & supply NEW parts for ABU, Akios, Daiwa, Penn & Mitchell fishing reels, if available from the manufacturer

ABU 706 MATCH CAPACITY SHALLOW SPOOL
 
A new Abu 706 shallow plastic Match spool. This spool is also suitable for the ABU 1044, Premier 704, ABU 706 and 506 MK2 

Part number 119357

Not suitable for the Swedish ABU 501/505/506 Closed face reels
 
Manufacturer ABU-GARCIA   

Please check your reel schematic to confirm that you are ordering the correct part. To find the part number consult the exploded diagram, which comes with the reel when new. If UNSURE please ASK, BEFORE ordering! If you order the wrong part additionally fees will apply, as we cannot be responsible for customers mistakes!

Jim's Reel Shop SERVICE & Supply new parts for Abu-Garcia, Daiwa, Mitchell, Penn & Shimano fishing reels