ABU 601, 601M & 602 DIPLOMAT SPOOL CHENILLE 

Two pieces of chenille which is enough to refurbish an ABU Diplomat 601, 601M & 602 spool.

White in colour with a central copper wire.

PLEASE NOTE: Not suitable for the modern Abu 506Mk2, 706 or the Gold Max 507

Please check your reel schematic to confirm that you are ordering the part you require, using the correct part number. 

This listing is copyrighted ©www.jimsreelshop 2021

Jim's Reel Shop Service & Supply parts for ABU-Garcia, Akios, Daiwa, Penn, Shimano & Mitchell reels, if the parts are available!

ABU GARCIA 507MK2 HANDLE ASSEMBLY #1386403  
 
An ABU-Garcia 507MK2 Handle Assembly, a reclaimed clean & serviceable part
 
Abu part number 1386403

 Please check your reel schematic to confirm that you are ordering the part you require, using the correct part number.

Please note NOT suitable for the 1990's Gold Max 507 MK2 or Swedish 507

Please check your reel schematic to confirm that you are ordering the correct part. To find the part number consult the exploded diagram, which comes with the reel when new. If UNSURE please ASK, BEFORE ordering. Thank you! If unsure these parts are suitable for your reel, please ASK!

Please make sure your address, is the same as registered to the card, used for payment! If it isn't, your order will be cancelled!

Due diligence checks are in process at Jim's Reel Shop!!!
This listing is copyright ©www.jimsreelshop2024

Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

ABU GARCIA 507MK2 HANDLE SHAFT # 1386401  
 
A RECLAIMED Abu-Garcia 507MK2 Handle Shaft 
 
Abu part number 1386401

Please see the images!
Please check your reel schematic to confirm that you are ordering the correct part. To find the part number consult the exploded diagram, which comes with the reel when new. If UNSURE please ASK, BEFORE ordering. Thank you! If unsure these parts are suitable for your reel, please ASK!

 Please note NOT suitable for the 1990's Gold Max 507 MK2

Please make sure your address, is the same as registered to the card, used for payment! If it isn't, your order will be cancelled!

Due diligence checks are in process at Jim's Reel Shop!!!
This listing is copyright ©www.jimsreelshop2023

Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

ABU-GARCIA MK2 CONE ASSEMBLY SPOOL COWLING 
 
An Abu-Garcia 507 MK2 closed face, Cone assembly also known as a spool cowling
 
Abu part number 1386374
 
Please note this spool is NOT SUITABLE For the original 1960/1980 Swedish 507 or the 1990's 507MK2 Goldmax reels

Jim's Reel Shop is a UK business who SERVICE ABU-Garcia, Akios, Daiwa, Penn & the classic Mitchell reels. We source and export parts worldwide. We are official Pure Fishing reel parts stockists. We are official UK stockists of Corrosion X products, Smooth Drag and the Rocket Reel Co. products

ABU CLOSED-FACE 506, 506M, 507 & 508 DRAG ADJUSTMENT KNOB #6813C 

A new custom manufactured Aluminium alloy, drag adjustment knob manufactured to fit the Swedish manufactured 1960-1980's closed-face 506, 506M, 507 and 508 reels.

This drag knob was manufactured to replace the standard ABU drag adjustment knob, part number 6813, which is an obsolete part and no longer available from ABU.

This part is MADE IN ENGLAND

Please check your reel schematic to confirm that you are ordering the part you require, using the correct part number.

This listing is copyright©www.jimsreelshop 2021

Jim's Reel Shop Service & supply NEW parts for Abu-Garcia, Akios, Daiwa, Penn, Shimano & the classic Mitchell fishing reels

ABU 1044/PREMIER 704/ABUMATIC170/1075 E-CLIP RETAINER # 17304 (PAIR)
 
This listing is for a PAIR of ABU E-clips. These E-clips are used to retain the spool holder.

ABU part number 17304

This part is compatible with the following ABU reels:  

1044 (91 00)
Premier 704
ABUMATIC 1075 (85 01) 
ABUMATIC 170 (03)

Please check your reel schematic to confirm that you are ordering the correct part. To find the part number consult the exploded diagram, which comes with the reel when new. If UNSURE please ASK, BEFORE ordering!
If you order using the incorrect part number, or cannot be bothered to read the description, the part will NOT FIT your reel

This listing is copyright©www.jimsreelshop2023

Jim's Reel Shop SERVICE & supply NEW parts for ABU, Akios, Daiwa, Penn & Mitchell fishing reels, if available from the manufacturer

ABU 501 CARBON DRAG WASHER UP-GRADE KITS

Smooth Drag from the USA, manufacture Carbontex Carbon fibre drag washers. The high quality carbon fibre material is the perfect combination of unrivalled stopping power, silky smoothness and outstanding consistency, with a high heat tolerance. Carbontex drag washers are the the best upgrade in drag washers, available in my opinion. Try them and you will not be disappointed. They enable a greater and smoother drag pressure to be applied to the line than the stock drag washers
 
This is a kit assembled by Jim's Reel Shop for the ABU 501 closed-face spinning reel. It contains two Carbontex drag washer, which replace the stock leather drag washers. ABU part number 5752. The leather drag washer wear and perish being a natural material and over thirty-eight years old! The ABU 501 was introduced in 1977. Make sure the metal drag washers 4751, 5753 & 6850 are in good order especially 5751 which does corrode. It is essential all remnants of the old leather drag washers are removed from the metal drag washers and they ARE NOT CORRODED

         We can service and fit these Carbontex drag washers to your reel if you prefer

This listing is copyright ©www.jimsreelshop2023
 
Please make sure your delivery address, is the same as registered to the card used for payment! Due diligence checks are in process at Jim's Reel Shop!!!
 
Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

ABU SVANGSTA 503 CLOSED-FACE SIDE COVER 6824

A New Old Stock ABU Svangsta 503 Closed-Face Housing Cover. An extremely hard part to find. An unused ABU part from the 1970's. 

ABU part number 6824

Please see the images!
Please check your reel schematic to confirm that you are ordering the correct part. To find the part number consult the exploded diagram, which comes with the reel when new. If UNSURE please ASK, BEFORE ordering. Thank you!   
Please make sure your address, is the same as registered to the card, used for payment! If it isn't, your order will be cancelled!

Due diligence checks are in process at Jim's Reel Shop!!!
This listing is copyright ©www.jimsreelshop2024

Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

ABU 706 MATCH CAPACITY SHALLOW SPOOL
 
A new Abu 706 shallow plastic Match spool. This spool is also suitable for the ABU 1044, Premier 704, ABU 706 and 506 MK2 

Part number 119357

Not suitable for the Swedish ABU 501/505/506 Closed face reels
 
Manufacturer ABU-GARCIA   

Please check your reel schematic to confirm that you are ordering the correct part. To find the part number consult the exploded diagram, which comes with the reel when new. If UNSURE please ASK, BEFORE ordering! If you order the wrong part additionally fees will apply, as we cannot be responsible for customers mistakes!

Jim's Reel Shop SERVICE & Supply new parts for Abu-Garcia, Daiwa, Mitchell, Penn & Shimano fishing reels

ABU SWEDEN CLOSED FACE REEL CLAMP # 6713

A new old stock clamp for the classic Swedish ABU closed face; 501, 503, 505, 506, 506M, 507, 508 and 520 models. This is the coffin shaped part which retains the line guide and Ejector

ABU part number 6713

A part NLA no longer available from ABU, along with most parts, we keep in for servicing!

Please see the images!
Please check your reel schematic to confirm that you are ordering the correct part. To find the part number consult the exploded diagram, which comes with the reel when new. If UNSURE please ASK, BEFORE ordering. Thank you!   

Please make sure your address, is the same as registered to the card, used for payment! If it isn't, your order will be cancelled!

Due diligence checks are in process at Jim's Reel Shop!!!
This listing is copyright ©www.jimsreelshop2024

Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels