MITCHELL 320/324 & 524 NOS BAIL SPRINGS # 81223

A New Old Stock genuine Mitchell 320/324 & 524 Bail Spring

Mitchell part number 81223

Genuine obsolete Mitchell parts from the 1970's!

Jim's Reel Shop Service and Supply NEW parts for ABU, Daiwa, Mitchell & Penn fishing reels

MITCHELL ANTI-REVERSE LEVER 81976

A New Old Stock Mitchell as fitted to the Mitchell

302N, 303N, 386,387, 396, 396, 396PUM, 397, 397PUM, 486, 487, 488, 489, 496, 496AP, 496PUM, 496X, 496 PRO, 497, 498, 499, 499 PRO and 496X fixed spool reels copyright ©James Partridge 2006

Please check your reel exploded diagram/reel schematic to confirm this part is the part you require, using Penn part numbers.

This part is no longer available from Mitchell

This listing is copyright ©www.jimsreelshop2020

Jim’s Reel Shop Service & Supply NEW parts for Abu-Garcia, Akios, Daiwa, Penn & Mitchell fishing reels, (if the parts are available, from the manufacturer)

MITCHELL BAIL TRIP LEVER SCREW #81017
 
A NOS New Old Stock (unused) Mitchell Bail Trip Lever Screw 
 
Mitchell part No 81017
 
As fitted to the following Mitchell fixed-spool reels:
 
300, 300A, 300C, 300 Pro, 304, 304S, 305, 306, 306A, 314, 340, 350, 406, 407, 410A, 411, 810 & 810A
 
Important: please check your reel schematic/exploded reel diagram for the part number. If it is a different part number it may not fit! 
 
This is an unused scarce Mitchell part, which has been unavailable from Mitchell since the late 1990's!
 
If unsure, please ASK!

This listing is copyright ©www.jimsreelshop2018

Jim's Reel Shop Service & Supply parts for ABU-Garcia, Akios, Daiwa, Penn, Shimano & Mitchell reels, if the parts are available!

MITCHELL MATCH 330/440/441/440ALC BAIL SCREW # 82373

A new old stock Bail Screw for the Mitchell Ottomatic 330A Mitchell Match, 440A, 440A MATCH, 440ALC, 840 & 840A MATCH models.

This is an unused scarce Mitchell Match part for the auto bail mechanism. It has been unavailable from Mitchell since the late 1990's

Please see the images!
Please check your reel schematic to confirm that you are ordering the correct part. To find the part number consult the exploded diagram, which comes with the reel when new. If UNSURE please ASK, BEFORE ordering. Thank you!   

Please make sure your address, is the same as registered to the card, used for payment! If it isn't, your order will be cancelled!

Due diligence checks are in process at Jim's Reel Shop!!!
This listing is copyright ©www.jimsreelshop2024

Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

MITCHELL 207/207S 209/209S 219/219S BAIL LUG #82261
 
A NEW Old Stock Mitchell Bail Lug  

Mitchell part number 82261

This is the metal lug fitted to the following Mitchell Spinning Reels;
207
207S
209
209S
219
219S

PLEASE NOTE IT DOES NOT COME WITH THE BAIL BUMPER 82215 OR SCREW 82216 These parts are available separately
 
Important: please check your reel schematic/exploded reel diagram for the part number. If it is a different part number it may not fit! 
If unsure, please ASK!

This listing is copyright ©www.jimsreelshop2018

Jim's Reel Shop Service & Supply parts for ABU-Garcia, Akios, Daiwa, Penn, Shimano & Mitchell reels, if the parts are available!

MITCHELL 206/206S 208/208S 218/218S BAIL LUG #82260
 
A NEW Old Stock Mitchell Bail Lug 

This part has been discontinued and unavailable from Mitchell since the 1980's

Mitchell part number 82260

This is the metal lug fitted to the following Mitchell Spinning Reels;

206
206S
208
208S
218
218S

PLEASE NOTE: IT DOES NOT COME WITH THE BAIL BUMPER 82215 OR SCREW 82216 These parts are available separately
 
Important: please check your reel schematic/exploded reel diagram for the part number. If it is a different part number it may not fit! 
If unsure, please ASK!

This listing is copyright ©www.jimsreelshop2024

Jim's Reel Shop Service & Supply parts for ABU-Garcia, Akios, Daiwa, Penn, Shimano & Mitchell reels, if the parts are available!

CLASSIC MITCHELL 300/440 CARBONTEX DRAG WASHER UP-GRADE REPLACES # 81003
 
Carbontex drag washers are premium quality Carbon drag washers. A perfect combination of unrivalled stopping power, silky smoothness and outstanding consistency, with a high heat tolerance. Try them and you will not be disappointed! So much better than the 1950's Teflon & Sleet drag washers!

This listing is for a Carbontex drag washer to replace the Teflon drag washer located under the drag tensioning knob in the centre of the spool, for the following classic Mitchell fishing reels, from 1970-1998.A replacement for the Teflon drag washer part number 81003. Please check your reel schematic to confirm the part number.

300, 300A, 300C, 301, 301A, 301C, 330, 330A, 331, 350, 350A, 400, 410, 410A, 411, 411A, 440, 440 MATCH, 440A, 440A MATCH, 440ALC, 441, 441A, 441ALC, 810, 810A, 840, 840 MATCH, 841, 841 MATCH, 441A MATCH models 

This listing is copyright© www.jimsreelshop2022

Please check your reel schematic to confirm that you are ordering the part you require, using the correct part number.

PLEASE NOTE: The images illustrate the original Mitchell original drag washer & Carbontex drag washer, which is on offer. The image of the spool and spring tensioner is to show where the drag washer is located, they are not included in this listing. We have them in stock, if required

We have Carbontex drag washers available for most reels

Jim's Reel Shop Service & Supply parts for Abu-Garcia, Akios, Daiwa, Penn, Shimano & classic Mitchell reels

NEW OLD STOCK MITCHELL 300/301S SHALLOW MATCH SKIRTED SPOOL

A new Old Stock shallow Match Ultralight capacity spool for the Mitchell 300S & 301S Skirted spool reel models.

Mitchell part number 83101

This spool fits the French Mitchell 300S, 301S, 3350Z, 3360, 4450, 4450Z, 900 & 901 models

Important: please check your reel schematic/exploded reel diagram for the part number. If it is not the same part number it will NOT fit! If unsure, please ASK!
 
Please make sure your delivery address, is the same as registered to the card used for payment! UK Shipping only!

Due diligence checks are in process at Jim's Reel Shop!!!

This listing is copyright ©www.jimsreelshop2023

Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels within the UK

MITCHELL 600 SERIES CLUTCH FREE SPOOL ECCENTRIC LEVER SPRING 81697

A New Old Stock Garcia Mitchell 600P/600AP/602P/602AP/604/606/620/622/624 Multiplier free spool/Eccentric Lever Spring

New Old Stock parts from the 1970's.

Mitchell part number 81697 See the PDF sheet!

Please see the images

If unsure these parts are suitable for your reel, please ASK!

Please make sure your delivery address, is the same as registered to the card used for payment! Due diligence checks are in process at Jim's Reel Shop!!!

This listing is copyright ©www.jimsreelshop2023

Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

MITCHELL 602 NEW OLD STOCK MULTIPLIER SPOOL

A new old stock Mitchell 602 multiplier plastic spool.

The axle length is 72.5MM long.

Mitchell part number 82304

This listing is copyright©www.jimsreelshop2023
Please check your reel schematic to confirm that you are ordering the correct part. To find the part number consult the exploded diagram, which comes with the reel when new. If UNSURE please ASK, BEFORE ordering! If you order the wrong part additionally fees will apply, as we cannot be responsible for customers mistakes!

Jim's Reel Shop SERVICE & supply NEW parts for ABU, Akios, Daiwa, Penn & Mitchell fishing reels