MITCHELL 300A & 410A LINE ROLLER & SCREW 82005 & 82006

A NOS New Old Stock Line roller & Screw. Used on many classic 1970 & 1980's French Mitchell  fishing reels, please check your schematic!

Mitchell part numbers 82005 & 82006

Please see the images!
Please check your reel schematic to confirm that you are ordering the correct part, by part number. To find the part number consult the exploded diagram, which comes with the reel when new. If UNSURE please ASK, BEFORE ordering. Thank you
This listing is copyright©www.jimsreelshop2023

Please make sure your address, is the same as registered to the card, used for payment! If it isn't, your order will be cancelled!

Due diligence checks are in process at Jim's Reel Shop!!!

Jim's Reel Shop Service & supply NEW parts for ABU-Garcia, Daiwa, Penn & Mitchell fishing reels

MITCHELL SILENT ANTI-REVERSE GEAR NEW OLD STOCK # 83442

A new old stock Silent Ant-Reverse gear suitable for the classic 300A, 300C, 300 CENTURY, 300S, 301A, 301C, 301S, 330A, 331A, 350A, 400, 400S, 410A, 411A, 440A MATCH, 440ALC, 441A, 441L MATCH, & 441ALC models, with the Silent check

A New Old Stock Mitchell part. Unavailable from Mitchell for many decades!

Mitchell part number 83442

Please see the images  
If unsure these parts are suitable for your reel, please ASK!

Please make sure your address, is the same as registered to the card, used for payment! If it isn't, your order will be cancelled!

Due diligence checks are in process at Jim's Reel Shop!!!
This listing is copyright ©www.jimsreelshop2023

Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

4x10x4 STAINLESS STEEL SHIELDED BALL BEARING EZO JAPAN

A  top quality Stainless Steel, ball bearing manufactured in Japan

Measurements; 4x10x4 Inner Diameter x width x depth

These bearings are supplied in stainless steel (AISI440C or KS440)

Please make sure your address, is the same as registered to the card, used for payment! If it isn't, your order will be cancelled!

Due diligence checks are in process at Jim's Reel Shop!!!
This listing is copyright ©www.jimsreelshop2024

Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

STAINLESS STEEL DRIVE/MAIN GEAR SHIMS I/D 9MM O/D 15MM THICKNESS 0.30MM

Shims are used for obtaining the optimum ball bearing end float/clearance when setting up Drive & Pinion gears during routine maintenance of fishing reels. At Jim's Reel Shop we use Stainless Steel or Brass shims. These are Stainless Steel;

Dimensions;
I/D; inner diameter 9mm
O/D; outer diameter 15mm
T; Thickness 0.30mm
We have shims in 0.10, 0.20 & 0.30mm thicknesses all listed separately

Please see the images
If unsure these parts are suitable for your reel, please ASK!

This listing is copyright ©www.jimsreelshop2023
 
Please make sure your delivery address, is the same as registered to the card used for payment! Due diligence checks are in process at Jim's Reel Shop!!!
 
Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

STAINLESS STEEL DRIVE/MAIN GEAR SHIMS I/D 9MM O/D 15MM THICKNESS 0.20MM

Shims are used for obtaining the optimum ball bearing end float/clearance when setting up Drive & Pinion gears during routine maintenance of fishing reels. At Jim's Reel Shop we use Stainless Steel or Brass shims. These are Stainless Steel;

Dimensions;

I/D; inner diameter 9mm
O/D; outer diameter 15mm
T; Thickness 0.2mm
We have shims in 0.10, 0.20 & 0.30mm thicknesses all listed separately

Please see the images
If unsure these parts are suitable for your reel, please ASK!

This listing is copyright ©www.jimsreelshop2023
 
Please make sure your delivery address, is the same as registered to the card used for payment! Due diligence checks are in process at Jim's Reel Shop!!!
 
Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

MITCHELL 300 & 300A ONE PIECE BAIL ASSEMBLY WITH BUMPER

A complete bail assembly with bail bumper, for the early French Classic Mitchell 300 & the first versions of the Mitchell 300A models  

Mitchell part number 81017-1PIECE-ASSY.

Please see the images
If unsure these parts are suitable for your reel, please ASK!

This listing is copyright ©www.jimsreelshop2023
 
Please make sure your delivery address, is the same as registered to the card used for payment! Due diligence checks are in process at Jim's Reel Shop!!!
 
Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

MITCHELL 600 SERIES MULTIPLIER CARBON DRAG WASHER SET

A Carbontex drag washer set for Mitchell 600 Multiplier Reels

Three for the drag stack and one for under the main gear

A total of FOUR Carbontex drag washers to replace the original Mitchell washers which are now unobtainable in the drag stack.

Suitable for the French manufactured 600, 600A, 602, 602A, 604, 606, 620, 622 & 624 multipliers

Replacements for Mitchell part number 81718 and later re-numbered as 82127

We have many New Old Stock parts for the Mitchell 600 multipliers series

Please see the images!
Please check your reel schematic to confirm that you are ordering the correct part. To find the part number consult the exploded diagram, which comes with the reel when new. If UNSURE please ASK, BEFORE ordering. Thank you!   
If unsure these parts are suitable for your reel, please ASK!

Please make sure your address, is the same as registered to the card, used for payment! If it isn't, your order will be cancelled!

Due diligence checks are in process at Jim's Reel Shop!!!
This listing is copyright ©www.jimsreelshop2024

Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

8x14x4 EZO STAINLESS STEEL SHIELDED BALL BEARINGS PAIR

A pair of Stainless Steel top quality EZO branded ball bearings manufactured in Japan

Measurements; 8x14x4 Inner Diameter x width x depth

These bearings are supplied in stainless steel (AISI440C or KS440).
Sapporo Precision of Japan manufacture EZO brand miniature bearings and are leading specialists in their field with a deserved reputation for quality and reliability across the world. The EZO brand guarantees you a high precision product every time thanks to advanced production techniques and the highest levels of quality control.

This listing is copyright ©www.jimsreelshop2022
 
Please make sure your delivery address, is the same as registered to the card used for payment!

Due diligence checks are in process at Jim's Reel Shop!!!
 
Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

MEDIUM CAPACITY MITCHELL 300/400/800 SERIES SPOOLS

A refurbished serviceable Medium line capacity spool, for the classic French manufactured Mitchell egg shaped reels.

This Spool fits the classic French 1960/1970/1980/1990's Mitchell 300, 300A, 300C, 300PRO, 330, 331, 400, 410, 410A, 440, 440A Match, 441, 810 & 840/841 models.

Please see the images!!

Each spool has been degreased, ultra-sonically cleaned and reassembled using serviceable parts
This listing is copyright ©www.jimsreelshop2023
 
Please make sure your delivery address, is the same as registered to the card used for payment! Due diligence checks are in process at Jim's Reel Shop!!!
 
Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels

DEEP CAPACITY MITCHELL 300/400/800 SERIES GREY ALLOY SPOOLS

A refurbished serviceable Grey Deep line capacity spool, for the classic French manufactured Mitchell egg shaped reels.

This Spool fits the 1960/1970/1980/1990's Mitchell 300, 300A, 300C, 300PRO, 330, 331, 400, 410, 410A, 440, 440A Match, 441, 810 & 840/841 models.

Please see the images!!

Each spool has been degreased, ultra-sonically cleaned and reassembled using serviceable parts

We also have them available in Black. These are the Aluminium Spools

If UNSURE these Spools fit your reel, please ASK, BEFORE ordering. Thank you!   

Please make sure your address, is the same as registered to the card, used for payment! If it isn't, your order will be cancelled!

Due diligence checks are in process at Jim's Reel Shop!!!
This listing is copyright ©www.jimsreelshop2024

Jim's Reel Shop Service & supply NEW parts for ABU, Daiwa, Penn & Mitchell fishing reels